2.4G wireless camera product User manual details for FCC ID UCZ-LWU3720 made by Lorex Technology Inc. Document Includes User Manual. Lorex security systems are very easy to use with a simple setup. Installation requires no technical expertise. A user manual comes with every system to help you. The menu and navigation of DVR are comprehensive. Support is available all the time through email and telephone. Ability to extend cameras; All-in-one security camera system.
- Lorex Home Security Camera Manual
- Lorex Wireless Security Camera System Manual
- Lorex Wireless Security Camera Manual
SIMPLY AWARE™
Lorex Home Security Camera Manual
TIP
Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adaptor.
Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range.
Powering the Camera
1. Connect the Power Adaptor to the 5V Input on the back | 1 | 2 | 3 |
of the camera. |
2.Connect the power adapter to a power outlet.
3.Slide the power switch to the ON position.
NOTE:
• Only use the included power adapter to power the camera(s).
Pairing the Camera | |
3 | |
Place the camera and video monitor 12 inches apart. | |
1 | |
Turn on the camera first and then the video monitor. | |
Press the Menu button on the monitor, then select | |
2 | |
Pairing and press the OK button. | |
Select an available channel, and press the OK button. | |
3 | |
NOTE: By default, the camera included with the | |
system is paired to channel 1. | |
4 | Use a pen or paperclip to press the Pair button on |
the side of the camera within 30 seconds. | |
You should immediately see video from the camera on the video monitor.
NOTE:
•To pair multiple cameras, repeat steps 2~4, selecting a different channel in the pairing menu.
•You can add a maximum of four (4) wireless cameras to the video monitor.
4Pair Button
Use a pen or paper clip to press the Pair button during the pairing process with the video monitor.
FOR MORE INFORMATION: | LW2451AC1 QSG_EN_R1 Page 1 |
www.lorextechnology.com |
Lorex Wireless Security Camera System Manual
Ambient light levels and color temperature can affect the camera image quality. If the video feed appears tinted the ambient light may be causing an issue with the infrared (IR) LEDs or infrared (IR) cut filter.
To resolve the video feed color quality issue:
- Power cycle the camera. To power cycle your camera, please disconnect the power source for approximately 30 seconds. Reconnect the power source for the camera.
- To determine if low light levels are causing the issue, shine a flashlight in the lens for 3-5 seconds. Remove the flashlight and check if the video feed quality has improved.
- Check that the camera is receiving enough power to engage the IR LEDs. Cover the camera lens. Watch for the red LEDs to come on and listen for an audible click sound. This indicates the IR LEDs are turning on, and the camera is receiving enough power. If the camera is not receiving enough power to engage the infrared LEDs, connect the camera to a different power source.
- Re-position the camera so that it is in constant bright light, and ensure it is not pointing at reflective or shiny object (e.g., bodies of water or window panes).
- Move the camera out of direct exposure to the elements and adjust the sunshade (if applicable) and check all cable connections to the camera.
- Try using a different BNC cable or Power over Ethernet (PoE) / Ethernet cable to connect the camera to the back of the recorder.
- Ensure that the BNC or PoE cord length does not exceed the guideline set in your camera user manual. Image quality will degrade after the maximum recommended cable length. Click here for downloads and documentation for your product.
Lorex Wireless Security Camera Manual
REMINDER: The color displayed from a Color Night Vision (CNV) camera may appear differently under incandescent or florescent lighting conditions. Adjusting the camera settings in the DVR / NVR menu may help to improve the quality of the video image. For more information on adjusting video image quality refer to your user manual. Click here for downloads and documentation for your product.